Ip Multicast Ttl-Threshold - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

no ip multicast
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables IP multicast on the router.
console#configure
console(config)#ip multicast
console(config)#no ip multicast

ip multicast ttl-threshold

Use the ip multicast ttl-threshold command in Interface Configuration
ttlvalue
ttlvalue
mode to apply a
to a routing interface.
is the TTL threshold
which is applied to the multicast Data packets forwarded through the
interface.
Syntax
ttlvalue
ip multicast ttl-threshold
no ip multicast ttl-threshold
ttlvalue — Specifies TTL threshold. (Range: 0-255)
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (VLAN) mode
1021
Multicast Commands

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents