Sntp Broadcast Client Enable; Sntp Client Poll Timer - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

console(config)# sntp authenticate

sntp broadcast client enable

Use the sntp broadcast client enable command in Global Configuration
mode to enable a Simple Network Time Protocol (SNTP) Broadcast client. To
disable an SNTP Broadcast client, use the no form of this command.
Syntax
sntp broadcast client enable
no sntp broadcast client enable
Default Configuration
The SNTP Broadcast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables a Simple Network Time Protocol (SNTP)
Broadcast client.
console(config)# sntp broadcast client enable

sntp client poll timer

Use the sntp client poll timer command in Global Configuration mode to set
the polling time for the Simple Network Time Protocol (SNTP) client. To
return to the default settings, use the no form of this command.
Syntax
seconds
sntp client poll timer
no sntp client poll timer
1322
Clock Commands

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents