Show Ipv6 Interface - Dell PowerEdge M420 Reference Manual

Example
The following example displays the IPv6 status of forwarding mode and IPv6
unicast routing mode.
console#show ipv6 brief
IPv6 Forwarding Mode........................ Enable
IPv6 Unicast Routing Mode................... Disable
IPv6 Hop Limit...............................1

show ipv6 interface

Use the show ipv6 interface command in Privileged EXEC mode to show the
usability status of IPv6 interfaces. The output of the command includes the
method of assignment for each IPv6 address that is either autoconfigured or
leased from a DHCP server. Global addresses with no annotation are assumed
to be manually configured.
Syntax
show ipv6 interface [brief] [loopback loopback-id | tunnel tunnel-id | vlan
vlan-id [prefix]]
Syntax Description
Parameter
loopback-id
tunnel-id
vlan-id
prefix
Default Configuration
Displays all IPv6 interfaces.
Command Mode
User EXEC, Privileged EXEC modes
986
IPv6 Routing Commands
Description
Valid loopback interface ID
Valid tunnel interface ID
Valid VLAN ID
Display IPv6 Interface Prefix Information.