Dell PowerEdge M420 Reference Manual page 1192

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Syntax
show ipv6 ospf interface [interface-type interface-number]
Syntax Description
Parameter
interface-type
interface-number
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the information in VLAN 11's virtual
interface tables.
console#show ipv6 ospf interface vlan 11
IP Address..................................... Err
ifIndex........................................ 1
OSPF Admin Mode................................ Enable
OSPF Area ID................................... 0.0.0.0
Router Priority................................ 1
Retransmit Interval............................ 5
Hello Interval................................. 10
Dead Interval.................................. 40
LSA Ack Interval............................... 1
1192
OSPFv3 Commands
Description
The interface type, VLAN, tunnel or loopback
The valid interface number, a valid VLAN ID, tunnel identifier
(Range: 0–7) or loopback identifier (Range: 0–7).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents