Routing; Show Ip Brief - Dell PowerEdge M420 Reference Manual

routing

Use the routing command in Interface Configuration mode to enable IPv4
and IPv6 routing for an interface. View the current value for this function
with the show ip brief command. The value is labeled Routing Mode in the
output display. Use the no form of the command to disable routing for an
interface.
Syntax
routing
no routing
Default Configuration
Disabled is the default configuration.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example enables IPv4 and IPv6 routing for VLAN 15
console(config)#interface vlan 15
console(config-if-vlan15)#routing

show ip brief

Use the show ip brief command in Privileged EXEC mode to display all the
summary information of the IP.
Syntax
show ip brief
925
IP Routing Commands