None of the routing interfaces are enabled for PIM
show ipv6 pim neighbor
Use the show ipv6 pim neighbor command to display IPv6 PIM neighbors
discovered by PIMv2 Hello messages. If the interface number is not specified,
this command displays the neighbors discovered on all the PIM-enabled
show ipv6 pim neighbor [vlan
There is no default configuration for this command.
User EXEC, Privileged EXEC modes
There are no user guidelines for this command. Field descriptions are shown
in the table below.
(console) # show ipv6 pim neighbor vlan 10
IPv6 PIM Commands
A valid VLAN ID for which multicast routing has been enabled.
IPv6 address of the PIM neighbor
Time since the neighbor was learned
Time remaining for the neighbor to expire