Show Dot1X Advanced - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

User Guidelines
Configure the unauthenticated VLAN before using this command.
Example
The following example set the unauthenticated VLAN on port 1/0/2 to VLAN
20.
console(config-if-1/0/2)#dot1x unauth-vlan 20

show dot1x advanced

Use the show dot1x advanced command in Privileged EXEC mode to display
802.1x advanced features for the switch or for the specified interface. The
output of this command has been updated in release 2.1 to remove the
Multiple Hosts column and add an Unauthenticated VLAN column, which
indicates whether an unauthenticated VLAN is configured on a port. The
command has also been updated to show the Guest VLAN ID (instead of the
status) since it is now configurable per port.
Syntax
unit/slot/port
show dot1x advanced [{gigabitethernet
|
unit/slot/port
tengigabitethernet
}]
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays 802.1x advanced features for the switch.
console#show dot1x advanced
Port
Guest
Unauthenticated
793
802.1x Commands

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents