Field
EapolRespFramesRx
EapolReqIdFramesTx
EapolReqFramesTx
InvalidEapolFramesRx
EapLengthErrorFramesRx The number of EAPOL frames that have been received
LastEapolFrameVersion
LastEapolFrameSource
show dot1x users
Use the show dot1x users command in Privileged EXEC mode to display
802.1x authenticated users for the switch.
Syntax
show dot1x users [username
username — Supplicant username (Range: 1–160 characters)
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
Description
The number of valid EAP Response frames (other than
Resp/Id frames) that have been received by this
Authenticator.
The number of EAP Req/Id frames that have been
transmitted by this Authenticator.
The number of EAP Request frames (other than Rq/Id
frames) that have been transmitted by this
Authenticator.
The number of EAPOL frames that have been received
by this Authenticator in which the frame type is not
recognized.
by this Authenticator in which the Packet Body Length
field is invalid.
The protocol version number carried in the most recently
received EAPOL frame.
The source MAC address carried in the most recently
received EAPOL frame.
username
]
802.1x Commands
789