Domain-Name (Ip Dhcp Pool Config) - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Parameter Description
Parameter
ip-address1
Default Configuration
This command has no default configuration.
Command Mode
IP DHCP Pool Configuration mode
User Guidelines
This command has no user guidelines.

domain-name (IP DHCP Pool Config)

Use the domain-name command in IP DHCP Pool Configuration mode to
set the DNS domain name which is provided to a DHCP client by the DHCP
server. The DNS name is an alphanumeric string up to 255 characters in
length. Use the no form of the command to remove the domain name.
Syntax
domain
domain-name
no domain-name
domain — DHCP domain name. (Range: 1–255 characters)
Default Configuration
This command has no default configuration.
Command Mode
IP DHCP Pool Configuration mode
Description
Valid IPv4 address.
domain
DHCP Server and Relay Agent Commands
821

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents