Dell PowerEdge M420 Reference Manual page 784

User Guidelines
The following fields are displayed by this command.
Field
Clients
Authenticated using
Monitor Mode
Clients
Authenticated using
Dot1x
The following table describes the significant fields shown in the display.
Field
Interface
Username
Supp MAC Address
Session Time
Filter ID
VLAN Assigned
Example
The following example displays information about the 802.1x clients.
console#show dot1x clients all
Clients Authenticated using Monitor Mode....... 1
784
802.1x Commands
Description
Indicates the number of Dot1x clients authenticated using
Monitor mode.
Indicates the number of Dot1x clients authenticated using
802.1x authentication process.
Description
The port number.
The username representing the identity of the Supplicant.
This field shows the username when the port control is
auto or mac-based. If the port is Authorized, it shows the
username of the current user. If the port is unauthorized it
shows the last user that was authenticated successfully.
The MAC-address of the supplicant
The amount of time, in seconds, since the client was
authenticated on the port.
The Filter ID assigned to the client by the RADIUS server.
This field is not applicable when the Filter-ID feature is
disabled on the RADIUS server and client.
The VLAN assigned to the client by the radius server.
When VLAN assignments are disabled, RADIUS server
does not assign any VLAN to the port, and this field is set
to 0.