Show Backup-Config - Dell PowerEdge M420 Reference Manual

User Guidelines
This command has no user guidelines.
Example
console#rename file1.scr file2.scr

show backup-config

Use the show backup-config command in Privileged EXEC mode to display
the contents of the backup configuration file.
Syntax
show backup-config
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example shows backup-config data.
console#show backup-config
software version 1.1
hostname device
interface gigabitethernet 1/0/1
ip address 176.242.100.100 255.255.255.0
duplex full
speed 1000
1353
Configuration and Image File Commands