Script Validate - Dell PowerEdge M420 Reference Manual

scriptname — Name of the script file to be displayed. (Range: 1-31
•
characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the contents of the script file
console#script show config.scr
interface gigabitethernet 1/0/1
ip address 176.242.100.100 255.255.255.0
exit

script validate

Use the script validate command in Privileged EXEC mode to validate a
script file by parsing each line in the script file.The validate option is
intended for use as a tool in script development. Validation identifies
potential problems though it may not identify all problems with a given
script.
Syntax
script validate
scriptname — Name of the script file being validated. (Range: 1-31
•
characters)
Default Configuration
This command has no default configuration.
1336
Command Line Configuration Scripting Commands
scriptname
config.scr
.