Show Ip Igmp-Proxy Groups; Show Ip Igmp-Proxy Groups Detail - Dell PowerEdge M420 Reference Manual

show ip igmp-proxy groups

Use the show ip igmp-proxy groups command in Privileged EXEC mode to
display a table of information about multicast groups that IGMP Proxy
reported. It displays status parameters only when IGMP Proxy is enabled.
Syntax
show ip igmp-proxy groups
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example attempts to display a table of information about
multicast groups that IGMP Proxy reported.
console#show ip igmp-proxy groups
Interface Index................................ vlan13
Group Address
-------------
225.0.1.1
225.0.1.2

show ip igmp-proxy groups detail

Use the show ip igmp-proxy groups detail command in Privileged EXEC
mode to display complete information about multicast groups that IGMP
Proxy has reported.
Syntax
show ip igmp-proxy groups detail
894
IGMP Proxy Commands
Last Reporter
---------------
13.13.13.1
13.13.13.1 48
Up Time Member State Filter Mode Sources
------- ------------ ----------- ------
7 DELAY-MEMBER Exclude
DELAY-MEMBER Exclude
0
0