Cos-Queue Strict - Dell PowerEdge M420 Reference Manual

cos-queue strict

Use the cos-queue strict command in either Global Configuration mode or
Interface Configuration mode to activate the strict priority scheduler mode
for each specified queue. To restore the default weighted scheduler mode for
each specified queue, use the no form of this command.
Syntax
cos-queue strict {
no cos-queue strict {
• queue-id-1 — Specifies the queue ID for which you are activating the
strict priority scheduler. You can specify a queue ID for as many queues as
you have (queue-id 1 through queue-id-n). (Range: 0–6)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode or Interface Configuration (gigabitethernet,
port-channel, tengigabitethernet) mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to activate the strict priority scheduler
mode for two queues.
console(config)#cos-queue strict 1 2
The following example displays how to activate the strict priority scheduler
mode for three queues.
console(config)#cos-queue strict 1 2 4
610
QoS Commands
queue-id-1 queue-id-2
} [{
queue-id-1
} [{
queue-id-n
} ... {
queue-id-2
} ... {
}]
queue-id-n
}]