Show Ip Igmp Groups - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

show ip igmp groups

Use the show ip igmp groups command in User EXEC or Privileged EXEC
modes to display the registered multicast groups on the interface. If detail is
specified, this command displays the registered multicast groups on the
interface in detail.
Syntax
show ip igmp groups [interface-type interface-number] [detail]
Syntax Description
Parameter
interface-type
interface-number
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the registered multicast groups for VLAN 1.
console#show ip igmp groups interface vlan 3 detail
Multicast
IP Address
---------------
225.0.0.5
Description
Interface type of VLAN and a valid VLAN ID.
REGISTERED MULTICAST GROUP DETAILS
Last
Up
Reporter
Time
------------ ----------
1.1.1.5
00:00:05
Version1
Expiry
Host
Time
Timer
---------
-------
00:04:15
------
IGMP Commands
Version2
Group
Host
Compat
Timer
Mode
-------- -----
00:04:15
v2
883

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents