Vrrp Track Ip Route - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Syntax Description
Parameter
group
vlan vlan-id
priority
Default Configuration
No interfaces are tracked. The default decrement priority is 10.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines.
Example
The following example adds VLAN 2 to the virtual router tracked list (with a
priority decrement value of 20.)
(config-if-vlan10)#vrrp 1 track interface vlan 2
decrement 20

vrrp track ip route

Use the vrrp track ip route command to track the route reachability. When
the tracked route is deleted, the priority of the VRRP router is decremented
by the value specified in the priority argument. When the tracked route is
added, the priority is incremented by the same. A VRRP configured interface
can track more than one route. When a tracked route goes down, the priority
of the router is decreased by 10 (default priority decrement) for each downed
route. By default no routes are tracked. If we specify just the route to be
tracked without specifying the optional parameter, then the default priority
will be set.
1248
Virtual Router Redundancy Protocol Commands
Description
The virtual router identifier. (Range: 1-255)
Valid VLAN ID.
Priority decrement value for the tracked interface. (Range
254)
: 1-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents