Commands In This Chapter - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Applications used for datacasting: Since multimedia transmission has
become increasingly popular, multicast transmission use has increased.
Multicast transmission may be used to efficiently accommodate this type
of communication. For instance, the audio and video signals are captured,
compressed and transmitted to a group of receiving stations. Instead of
using a set of point-to-point connections between the participating nodes,
multicasting can be used for distribution of the multimedia data to the
receivers. The participating stations are free to join or leave an audio-cast
or a video-cast as needed. The variable membership maintenance is
managed efficiently through multicasting.

Commands in this Chapter

This chapter explains the following commands:
ip mcast boundary ip pim dr-priority
ip mroute
ip multicast
ip multicast ttl-
threshold
ip pim
ip pim bsr-border
ip pim bsr-
candidate
ip pim dense
1018
Multicast Commands
ip pim hello-
interval
ip pim join-prune-
interval
ip pim register-
rate-limit
ip pim rp-address
ip pim rp-
candidate
ip pim sparse
ip pim ssm
ip pim spt-
threshold
show bridge
multicast address-
table count
show ip multicast
show ip mcast
boundary
show ip multicast
interface
show ip mcast
mroute
show ip mcast
mroute group
show ip mcast
mroute source
show ip mcast mroute
static
show ip pim bsr-router
show ip pim interface
show ip pim neighbor
show ip pim rp hash
show ip pim rp
mapping

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents