The following example enters the VLAN database mode.
This command changes a dynamically created VLAN (one that is created by
GVRP registration) to a static VLAN (one that is permanently configured and
defined). The ID is a valid VLAN identification number. VLAN range is 2-
vlan-id — Valid vlan ID. Range is 2–4093.
This command has no default configuration.
VLAN Database Mode
The dynamic VLAN (created via GRVP) should exist prior to executing this
command. See the Type column in output from the show vlan command to
determine that the VLAN is dynamic.
The following changes vlan 3 to a static VLAN.
console(config-vlan)#vlan makestatic 3