Show Ipv6 Ospf Interface Vlan - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

LSAs Received.................................. 660
Originate New LSAs............................. 853
Sent Packets................................... 1013
Received Packets............................... 893
Discards....................................... 48
Bad Version.................................... 0
Virtual Link Not Found......................... 9
Area Mismatch.................................. 39
Invalid Destination Address.................... 0
No Neighbor at Source Address.................. 0
Invalid OSPF Packet Type....................... 0
Packet Type
--------------------
Hello
Database Description
LS Request
LS Update
LS Acknowledgement

show ipv6 ospf interface vlan

Use the show ipv6 ospf interface vlan command in Privileged EXEC mode to
display OSPFv3 configuration and status information for a specific vlan.
Syntax
show ipv6 ospf interface vlan {
vlan-id — Valid VLAN ID. Range is 1-4093.
brief — Displays a snapshot of configured interfaces.
Default Configuration
This command has no default configuration.
Sent
----------
295
10
4
521
209
vlan-id
| brief }
Received
----------
219
14
4
398
282
OSPFv3 Commands
1195

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents