Table of Contents
Advertisement
Initial system setup and configuration
This section describes the tasks for initial setup and configuration of the Dell system. The section also provides general steps to
set up the system and the reference guides for detailed information.
Topics:
•
Setting up the system
•
iDRAC configuration
•
Resources to install operating system
Setting up the system
Perform the following steps to set up the system:
Steps
Unpack the system.
iDRAC configuration
The Integrated Dell Remote Access Controller (iDRAC) is designed to make you more productive as a system administrator and
improve the overall availability of Dell servers. iDRAC alerts you to system issues, helps you to perform remote management, and
reduces the need for physical access to the system.
Options to set up iDRAC IP address
To enable communication between your system and iDRAC, you must first configure the network settings based on your
network infrastructure. The network settings option is set to DHCP, by default.
NOTE:
For static IP configuration, you must request for the settings at the time of purchase.
You can set up the iDRAC IP address using one of the interfaces in the table below. For information about setting up iDRAC IP
address, see the documentation links provided in the table below.
NOTE:
To access iDRAC, ensure that you connect the ethernet cable to the iDRAC dedicated network port or use the
iDRAC Direct port by using the micro USB (type AB) cable.
Options to log in to iDRAC
To log in to the iDRAC Web User Interface, open a browser and enter the IP address.
You can log in to iDRAC as:
● iDRAC user
● Microsoft Active Directory user
● Lightweight Directory Access Protocol (LDAP) user
In the login screen displayed, if you have opted for secure default access to iDRAC, the default username is root and enter
the iDRAC secure default password available on back of the Information Tag. If you opted for legacy password, use the iDRAC
legacy username and password - root and calvin, the iDRAC default password will be blank on the information tag. Then you
will be prompted and required to create a password of your choice before proceeding. You can also log in by using your Single
Sign-On or Smart Card.
28
Initial system setup and configuration
4
Advertisement
Table of Contents
