Show Ip Pim Bsr-Router - Dell PowerEdge M420 Reference Manual

--------------- --------------- --------------- ----------
1.1.1.1

show ip pim bsr-router

The show ip pim bsr-router command displays information about a bootstrap
router (BSR). This command deprecates the show ip pimsm componenttable
and show ip pimsm bsr commands.
Syntax
show ip pim bsr-router
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC, Privileged EXEC mode
User Guidelines
The following information is displayed:
Field
BSR address
BSR Priority
BSR Hash Mask Length The configured hash mask length (32 bits maximum).
Next Bootstrap Message
in
Next Candidate RP
Advertisement
Example
console#show ip pim bsr-router
1040
Multicast Commands
255.255.255.0
Description
IP address of the BSR.
The configured BSR priority.
Time remaining (in hours, minutes, and seconds) until a
BSR message is sent.
Time remaining (in hours, minutes, and seconds) until the
next RP advertisement is sent.
2.2.2.2 23