Commands In This Chapter - Dell PowerEdge M420 Reference Manual

Commands in this Chapter

This chapter explains the following commands:
key
port
priority
show tacacs
key
Use the key command in TACACS Configuration mode to specify the
authentication and encryption key for all TACACS communications between
the device and the TACACS server. This key must match the key used on the
TACACS daemon.
Syntax
key [ key-string ]
• key-string
Default Configuration
If left unspecified, the key-string parameter defaults to the global value.
Command Mode
TACACS Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example specifies an encryption and authentication key of 12.
console(tacacs)#key 12
710
TACACS+ Commands
— To specify the key name. (Range: 1 – 128 characters)
tacacs-server host
tacacs-server key
tacacs-server timeout
timeout