Ipv6 Pim Join-Prune-Interval - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

no ipv6 pim hello-interval
Parameter Description
Parameter
interval
Default Configuration
The default hello interval is 30 seconds.
Command Mode
Interface (VLAN) Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(if-vlan-10)#ipv6 pim hello-interval 20

ipv6 pim join-prune-interval

Use the ipv6 pim join-prune-interval command to administratively configure
the frequency of join/prune messages on the specified interface. Use the no
form of this command to return the join/prune interval to the default.
Syntax
ipv6 pim join-prune-interval
no ipv6 pim join-prune-interval
Parameter Description
Parameter
interval
944
IPv6 PIM Commands
Description
The number of seconds between successive hello transmissions.
Range 0-18000. Default 30.
interval
Description
The number of seconds between successive join-prune
transmissions. Range 0-18000 seconds. Default 60 seconds.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents