Show Ipv6 Access-Lists - Dell PowerEdge M420 Reference Manual

seq-num — Order of access list relative to other access lists
sequence
•
already assigned to this interface and direction. (Range: 1–4294967295)
Default Configuration
This command has no default configuration.
Command Modes
Global Configuration mode
Interface Configuration (Ethernet, Port-channel, VLAN) mode
User Guidelines
This command specified in 'Interface Config' mode only affects a single
interface, whereas the 'Global Config' mode setting is applied to all interfaces.
Example
The following example attaches an IPv6 access control list to an interface.
console(config-if-1/0/1)#ipv6 traffic-filter DELL_IP6
in

show ipv6 access-lists

Use the show ipv6 access-lists command in User EXEC and Privileged EXEC
mode to display an IPv6 access list and all of the rules that are defined for the
IPv6 ACL. Use the [
display.
Syntax
show ipv6 access-lists [
Parameter Description
Parameter
name
Time Range Name
name
] parameter to identify a specific IPv6 ACL to
name
]
Description
The name used to identify the IPv6 ACL.
Displays the name of the time-range if the IPv6 ACL rule has
referenced a time range.
IPv6 Access List Commands
483