Option - Dell PowerEdge M420 Reference Manual

User Guidelines
Use the show ip dhcp pool command to display pool configuration
parameters. The IPv4 address is conveyed in the SIADDR field of the DHCP
OFFER, DHCP ACK, DHCP INFORM ACK and DHCP BOOTREPLY
messages.
Example
console(config-dhcp-pool)#next-server 192.168.21.2

option

Use the option command in DHCP Pool Configuration mode to supply
arbitrary configuration information to a DHCP client. Use the no form of the
command to remove the option configuration. Use the show ip dhcp pool
command to display pool configuration parameters.
Syntax
option code {ascii string1|hex[
address8]}
no option code
Parameter Description
Parameter
code
ascii string1
hex string1
ip-address1
Default Configuration
There is no default option configured.
832
DHCP Server and Relay Agent Commands
string1...string8
Description
The DHCP TLV option code.
An ASCII character string. Strings with embedded blanks must
be wholly contained in quotes.
A hexadecimal string containing the characters [0-9A-F]. The
string should not begin with 0x. A hex string consists of two
characters which are parsed to fill a single byte. Multiple values
are separated by blanks.
An IPv4 address in dotted decimal notation.
ip-address1...ip-
]|ip[