Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Examples
The following examples show the parameters related to an individual tunnel
and to all tunnel interfaces.
console#show interfaces tunnel 1
Interface Link Status.......................... down
MTU size....................................... 1480 bytes
console#show interfaces tunnel
TunnelId
Interface
--------
---------
1
tunnel 1
2
tunnel 2
tunnel destination
Use the tunnel destination command in Interface Configuration mode to
specify the destination transport address of the tunnel.
Syntax
tunnel destination
no tunnel destination
ip-addr ess — Valid IPv4 address.
•
Default Configuration
This command has no default configuration.
TunnelMode
----------
IPv6OVER4
IPv6OVER4
ip-address
SourceAddress
DestinationAddress
-------------
10.254.25.14
10.254.25.10
10.254.20.10
Tunnel Interface Commands
----------------
1231