Syntax
ipv6 router ospf
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
This command has no user guidelines.
Example
Use the following command to enable OSPFv3.
console(config)#ipv6 router ospf
maximum-paths
Use the maximum-paths command in Router OSPFv3 Configuration mode
to set the number of paths that OSPF can report for a given destination.
Syntax
maxpaths
maximum-paths
no maximum-paths
maxpaths — Number of paths that can be reported. (Range: 1-2)
•
Default Configuration
maxpaths
2 is the default value for
.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
1173
OSPFv3 Commands