Dell PowerEdge M420 Reference Manual page 1204

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Syntax Description
Parameter
multicast
holdtime seconds
maxadvertinterval
seconds
minadvertinterval
seconds
preference number
address address
Default Configuration
Router discovery is disabled by default.
1800 seconds is the default value for holdtime.
600 seconds is the default value for maxadvertinterval.
The minadvertinterval default value is 450.
The preference default value is 0.
IP address 224.0.0.1 is the default configuration for address.
Command Mode
Interface Configuration (VLAN) mode
1204
Router Discovery Protocol Commands
Description
Configure the address that the interface uses to send the
router discovery advertisements to be 224.0.0.1, the all-hosts
IP multicast address. Use the no form of the command to
use 255.255.255.255, the limited broadcast address.
Integer value in seconds of the the holdtime field of the
router advertisement sent from this interface. (Range: 4-
9000 seconds)
Maximum time in seconds allowed between sending router
advertisements from the interface. (Range: 4 or the
minimum advertisement interval, whichever is greater, and
1800 seconds).
Minimum time in seconds allowed between sending router
advertisements from the interface. (Range: 3 to value of
maximum advertisement interval in seconds)
Preference of the address as a default router address, relative
to other router addresses on the same subnet.
(Range: -2147483648 to 2147483647)
IP address for router discovery advertisements. (Range:
[
224.0.0.1
all-hosts IP multicast address
[
limited broadcast address
]
or 255.255.255.255
]
)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents