Show Running-Config - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Images currently available on Flash
------------------------------------------------------------------
unit
image1
------------------------------------------------------------------
1
0.31.0.0

show running-config

Use the show running-config command in Privileged EXEC mode to display
the contents of the currently running configuration file, including banner
configuration. The command only displays the configurations that are non-
default.
NOTE:
All non-default configurations for the Captve Portal branding images and
encoded Unicode are not displayed via the standard show running-config
command. If desired, you can view this data in the script files or by using the all
mode for the show running-config command. In addition, please note that this non-
readable data is contained and displayed at the end of the script files.
Syntax
show running-config [
all -—To display or capture the commands with settings and
configuration that are equal to the default value, include the
option.
scriptname -—If the optional scriptname is provided, the output is
redirected to a script file.
NOTE:
If you issue the show running-config command from a serial connection,
access to the switch through remote connections (such as Telnet) is suspended
while the output is being generated and displayed.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
image2
0.31.0.0
all
scriptname
|
]
Configuration and Image File Commands
current-active
image2
next-active
image2
all
1355

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents