Ipv6 Access-List Rename - Dell PowerEdge M420 Reference Manual

Syntax
name
ipv6 access-list
no ipv6 access-list
name — Alphanumeric string of 1 to 31 characters uniquely identifying
•
the IPv6 access list.
Default Configuration
There is no default configuration for this command.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command
Example
The following example creates an IPv6 ACL named "DELL_IP6" and enters
the IPv6-Access-List Config mode:
console(config)#ipv6 access-list DELL_IP6
console(Config-ipv6-acl)#

ipv6 access-list rename

The ipv6 access-list rename command changes the name of an IPv6 Access
Control List (ACL). This command fails if an IPv6 ACL with the new name
already exists.
Syntax
ipv6 access-list rename
name — the name of an existing IPv6 ACL.
•
newname — alphanumeric string from 1 to 31 characters uniquely
•
identifying the IPv6 access list.
name
name newname
IPv6 Access List Commands
481