Boot Host Autosave; Boot Host Dhcp - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

boot host autosave

Use the boot host autosave command in Global Configuration mode to
enable automatically saving the downloaded configuration on the switch. Use
the no form of this command to disable automatically saving the downloaded
configuration on the switch.
Syntax
boot host autosave
no boot host autosave
Parameter Description
This command does not require a parameter description.
Default Configuration
The default value is disabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines
Example
console#
console#configure
console(config)#boot host auto-save
console(config)#no boot host auto-save

boot host dhcp

Use the boot host dhcp command in Global Configuration mode to enable
Auto-Install and Auto Configuration on the switch. When a switch boots
with a saved startup configuration that includes this command, the Auto-
1265
Auto-Install Commands

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents