Dell PowerEdge M420 Reference Manual page 1249

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Use the no form of this command to remove the route from the tracked list or
to restore the priority decrement to its default. When removing a tracked IP
route from the tracked list, priority should be incremented by the decrement
value if the route is not reachable.
Syntax
group
vrrp
track ip route
group
no vrrp
track ip route
Parameter Description
Parameter
group
ip-address/prefix-length
priority
Default Configuration
There are no routes tracked by default.
The default decrement priority is 10.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example adds the route 2.2.2.0/24 to the virtual router tracked
list (with a priority decrement value of 20).
console(config-if-vlan10)#vrrp 1 track ip route
2.2.2.0/24 decrement 20
ip-address/prefix-length
ip-address/prefix-length
Description
The virtual router identifier. (Range: 1–255).
Specifies the route to be tracked.
Priority decrement value for the tracked route. (Range:
1–254).
Virtual Router Redundancy Protocol Commands
priority
[ decrement
]
1249

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents