Dell PowerEdge M420 Reference Manual page 1345

Parameter Description
destination-
The URL or reserved keyword of the destination file. (Range: 1-160
url characters.
List of valid destination parameters for downloading to the switch:
backup-config
image
script
startup-config
ias-users
Valid destination URLs for uploading from the switch:
xmodem
tftp://{
scp://{
sftp://{
flash://
usb://
The following list describes syntax keywords.
source-url — The location URL or reserved keyword of the source file
•
being copied. (Range: 1–160 characters.)
destination-url — The URL or reserved keyword of the destination file.
•
(Range: 1–160 characters.)
ipaddr — The IPv4 or IPv6 address of the server.
•
hostname — Hostname of the server. (Range: 1–158 characters). The
•
command allows spaces in the host name when specified in double quotes.
filepath — The path to the file on the server.
•
filename — The name of the file on the server.
•
username — The user name for logging into the remote server via SSH.
•
ipaddress hostname
|
user ipaddresss
@ |
user ipaddress
@ |
filename
filename/filename
Configuration and Image File Commands
Downloads config file using xmodem,
sftp, or tftp.
Downloads code file by xmodem, ftp,
sftp, or tftp.
Downloads configuration script by
xmodem, sftp, or tftp.
Downloads config file using xmodem or
tftp.
Downloads the ias-users database file.
filepath filename
}/ /
hostname filepath
}/
hostname filepath
}/
filename
/
filename
/
1343