Dell PowerEdge M420 Reference Manual page 479

Parameter
every
icmpv6 | ipv6 | tcp
| udp |
protocolnumber
any | sourceipv6
prefix/
prefixlength
eq {portnumber |
portkey}
any |
destinationipv6
prefix/
prefixlength
flow label flow-label-
value
dscp dscp-value
assign-queue queue-
id
log
mirror interface
redirect interface
time-range-name
Description
Allows all protocols.
Protocol to match, specified as keywords icmp, igmp, ipv6, tcp,
udp or as a standard protocol number from 1–255.
any matches any source IP address. Or, you can specify a source
IPv6 addressed expressed as a prefix/prefixlength.
eq matches a port number being used as a match criteria. The
first reference provides the source match criteria and the
second provides destination match criteria.
The portnumber variable must be in the range 0–65535.
Or you can specify one of the values as the portkey: domain,
echo, efts, ftpdata, http, smtp, snmp, telnet, tftp, and www.
any matches any source IP address. Or, you can specify a source
IPv6 addressed expressed as a prefix/prefixlength.
The value to match in the Flow Label field of the IPv6 header
(Range 0–1048575).
Specifies the TOS for an IPv6 ACL rule depending on a match
of DSCP values using the parameter dscp.
Specifies particular hardware queue for handling traffic that
matches the rule. (Range: 0-6)
Specifies that this rule is to be logged.
Allows the traffic matching this rule to be copied to the
specified interface.
This parameter allows the traffic matching this rule to be
forwarded to the specified interface.
Use the time-range parameter to impose a time limitation on
the IPv6 ACL rule as defined by the parameter
name
.
IPv6 Access List Commands
time-range-
479