Ip Rip Authentication - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Default Configuration
Disabled is the default configuration.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines.
Example
console(config-if-vlan2)#ip rip
console(config-if-vlan2)#no ip rip

ip rip authentication

Use the ip rip authentication command in Interface Configuration Mode to
set the RIP Version 2 Authentication Type and Key for the specified VLAN.
Use the no form of the command to return the authentication to the default
value.
Syntax
ip rip authentication {none | {simple
no ip rip authentication
none—Do not use RIP authentication on the VLAN.
simple—Use simple authentication on the VLAN.
key — Authentication key for the VLAN. (Range: 16 bytes or less)
encrypt — Use MD5 encryption for the RIP interface.
key-id — Authentication key identifier for authentication type encrypt.
(Range: 0-255)
Default Configuration
This command has no default configuration.
key
} | {encrypt
Routing Information Protocol Commands
key key-id
}}
1219

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents