Example
console(config)#port-aggregator group 1
console(config-aggregator-1)#add ethernet 1/g1
console(config-aggregator-1)#
duplex
Use the duplex command in port aggregator configuration mode to configure
the full/half duplex operation of all member ports in the aggregator
group/zone. To restore the default, use the no form of this command.
Syntax
[half | full]
duplex
no duplex
half — Force half-duplex operation.
•
full — Force full-duplex operation.
•
Default Configuration
This command has no default configuration.
Command Mode
Port Aggregator mode
User Guidelines
This command has no user guidelines.
Example
console(config)#port-aggregator group 1
console(config-aggregator-1)#speed 1000
console(config-aggregator-1)#
566
Port Aggregator Commands