Dell PowerEdge M420 Reference Manual page 957

Parameter Description
Parameter
rp-address
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC, Privileged EXEC modes
User Guidelines
There are no user guidelines for this command. Field descriptions are shown
in the following table.
Field
RP Address
Group Address
Origin
Example
(console) # show ipv6 pim rp mapping 192.168.10.1
RP Address
Group Address
Group Mask
Origin
(switch) #show ipv6 pim rp mapping
Description
IP address of the RP
Description
Address of the RP
Address of the multicast group
Origin from where this group mapping is learned
2001:db8:85a3:0:0:8a2e:370:7334
ff1e:abcd:def1::0
/24
Static
IPv6 PIM Commands
957