Area Virtual-Link Retransmit-Interval - Dell PowerEdge M420 Reference Manual

Syntax
areaid
area virtual-link
areaid
no area virtual-link
areaid — Valid OSPFv3 area identifier.
•
neighbor — Router ID of neighbor.
•
seconds — Hello interval. (Range: 1-65535)
•
Default Configuration
10 is the default value for
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures a hello interval of 20 seconds for the OSPF
virtual interface on the virtual interface identified by area 1 and its neighbor.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 virtual-link 2 hello-
interval 20

area virtual-link retransmit-interval

Use the area virtual-link retransmit-interval command in Router OSPFv3
Configuration mode to configure the retransmit interval for the OSPF virtual
interface on the virtual interface identified by
Syntax
areaid
area virtual-link
areaid
no area virtual-link
areaid — Valid OSPFv3 area identifier.
•
neighbor
hello-interval
neighbor
hello-interval
seconds
.
neighbor
retransmit-interval
neighbor
retransmit-interval
seconds
areaid neighbor
and
seconds
OSPFv3 Commands
.
1157