Ipv6 Dhcp Pool - Dell PowerEdge M420 Reference Manual

FILE LOCATION: C:\My Documents\ActiveProjects\2CSPC7000-SWUM400 Dell Zeiss CLI
Guide\working\DHCPv6.fm
Syntax
domain
domain-name
domain
no domain-name
domain — DHCPv6 domain name. (Range: 1–255 characters)
•
Default Configuration
This command has no default configuration.
Command Mode
IPv6 DHCP Pool Configuration mode
User Guidelines
DHCPv6 pool can have multiple number of domain names with maximum of
8.
Example
The following example sets the DNS domain name "test", which is provided
to a DHCPv6 client by the DHCPv6 server.
console(config)#ipv6 dhcp pool addrpool
console(config-dhcp6s-pool)#domain-name test
console(config-dhcp6s-pool)#no domain-name test

ipv6 dhcp pool

Use the ipv6 dhcp pool command in Global Configuration mode to enter
IPv6 DHCP Pool Configuration mode. DHCPv6 pools are used to specify
information for DHCPv6 server to distribute to DHCPv6 clients. These pools
are shared between multiple interfaces over which DHCPv6 server
capabilities are configured.
Syntax
pool-name
ipv6 dhcp pool
pool-name
no ipv6 dhcp pool
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 3 / 1 0 / 1 1 - F O R P R O O F O N LY
845
DHCPv6 Commands