Ipv6 Route - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Command Mode
Interface Configuration (VLAN, Tunnel, Loopback) mode
User Guidelines
This command has no user guidelines.
Example
The following example suppresses router advertisement transmission.
console(config)#interface vlan 15
console(config-if-vlan15)#ipv6 nd suppress-ra

ipv6 route

Use the ipv6 route command in Global Configuration mode to configure an
IPv6 static route. Use the no form of the command to remove a preference,
an individual next hop, or all next hops for a route. Using the no ipv6 route
distance form causes the system to use the system default administrative
distance.
Syntax
distance
ipv6 route
ipv6-prefix/prefix-length
ipv6 route
preference
address} [
no ipv6 route
no ipv6 route
no ipv6 route
Syntax Description
Parameter
distance
ipv6-prefix
980
IPv6 Routing Commands
]
ipv6-prefix/prefix-length ipv6-address preference
ipv6-prefix/prefix-length interface-type ipv6-address
ipv6-prefix/prefix-length interface
Description
The default administrative distance for static routes. (Range 1-
255)
An IPv6 prefix representing the subnet that can be reached via
the next-hop neighbor.
interface-type
{ipv6-address |
ipv6-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents