Dns-Server (Ip Dhcp Pool Config) - Dell PowerEdge M420 Reference Manual

no default-router
Parameter Description
Parameter
ip-address1
ip-address2
Default Configuration
No default router is configured.
Command Mode
DHCP Pool Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config-dhcp-pool)#default-router 192.168.22.1
192.168.23.1

dns-server (IP DHCP Pool Config)

Use the dns-server command in IP DHCP Pool Configuration mode to set
the IP DNS server address which is provided to a DHCP client by the DHCP
server. DNS server address is configured for stateless server support.
Syntax
ip-address1
dns-server
no dns-server
820
DHCP Server and Relay Agent Commands
Description
The IPv4 address of the first default router for the DHCP
client.
The IPv4 address of the second default router for the DHCP
client.