Show Ip Protocols - Dell PowerEdge M420 Reference Manual

Burned In MAC Address............... 001E.C9AA.AD1C

show ip protocols

Use the show ip protocols command in User EXEC or Privileged EXEC mode
to display the parameters and current state of the active routing protocols.
Syntax
show ip protocols
Syntax Description
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes
User Guidelines
This command has no user guidelines.
Example
The following example displays parameters and current state of active routing
protocols.
console#show ip protocols
Routing Protocol is "rip"
Sending updates every 30 seconds
Invalid after 180 seconds, hold down 120, flushed after 300
Redistributing: RIP, Static, OSPF
Default version control: send version 1, receive version 1
Interfaces:
Interface Send Receive Key-chain
929
IP Routing Commands