Dell PowerEdge M420 Reference Manual page 520

Syntax
show iscsi
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the iSCSI configuration.
console#show iscsi
iSCSI enabled
iSCSI CoS enabled
iSCSI vpt is 5
Session aging time: 10 min
Maximum number of sessions is 192
------------------------------------------------
iSCSI Targets and TCP Ports:
------------------------------------------------
TCP Port
860
3260
30001
vendor:diskarrays.sn.45678.tape:sys1.xyz
30033
------------------------------------------------
iSCSI Static Rule Table
------------------------------------------------
520
iSCSI Optimization Commands
Target IP Address
-
-
172.16.1.1
172.16.1.10
Name
-
-
iqn.1993-11.com.disk-