datarate — Data rate in kilobits per second (kbps). (Range:
burstsize — Burst size in Kbps (Range: 1–128)
conform action — Indicates what happens when the packet is conforming
to the policing rule: it could be dropped, it could have its COS modified, it
could have its IP precedence modified, or it could have its DSCP
modified. The same actions are available for packets that do not conform
to the policing rule.
cos — Class of Service value. (Range: 0–7)
dscpval — DSCP value. (Range: 0–63 or a keyword from this list, af11,
af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, be, cs0, cs1,
cs2, cs3, cs4, cs5, cs6, cs7, ef)
This command has no default configuration.
Policy-Class-Map Configuration mode
Only one style of police command (simple) is allowed for a given class
instance in a particular policy.
The following example shows how to establish the traffic policing style for the
console(config-policy-classmap)#police-simple 33 34
conform-action transmit violate-action transmit
Use the policy-map command in Global Configuration mode to establish a
new DiffServ policy or to enter policy map configuration mode. To remove
the policy, use the no form of this command.