Show Ip Route - Dell Force10 MXL Blade Reference Manual

show ip route

View information, including how they were learned, about the IP routes on the switch.
Syntax show ip route [ hostname | ip-address [ mask ] [ longer-prefixes ] | list prefix-list [ process-id ] | all |
connected | static | summary ]
Parameter
ip-address
mask
longer-prefixes
list prefix-list
process-id
connected
all
static
summary
Command Modes EXEC
EXEC Privilege
Command
Version 8.3.16.1
History
Example Figure 15-17. show ip route all Command Example
FTOS#show ip route all
Codes: C - connected, S - static, R - RIP,
Gateway of last resort is not set
FTOS#
(OPTIONAL) Specify a name of a device or the IP address of the device to view
more detailed information about the route.
(OPTIONAL) Specify the network mask of the route. Use this parameter with
the IP address parameter.
(OPTIONAL) Enter the keyword
common prefix.
(OPTIONAL) Enter the keyword
See show ip route
(OPTIONAL) Specify that only OSPF routes with a certain process ID must be
displayed.
(OPTIONAL) Enter the keyword
connected routes.
(OPTIONAL) Enter the keyword
(OPTIONAL) Enter the keyword
route command.
(OPTIONAL) Enter the keyword
Introduced on MXL 10/40GbE Switch IO Module
B - BGP, IN - internal BGP, EX - external BGP,LO - Locally Originated,
O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1,
L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default,
> - non-active route, + - summary route
Destination Gateway
----------- -------
longer-prefixes
list
and the name of a configured prefix list.
list.
connected
to view only the directly
all
to view both active and non-active routes.
static
to view only routes configured by the
summary.
See
Dist/Metric Last Change
----------- -----------
to view all routes with a
ip
show ip route summary.
IPv4 Routing | 315