neighbor — Drop the adjacency with all OSPF neighbors. On each
•
neighbor's interface, send a one-way hello. Adjacencies may then be
reestablished.
interface vlan
•
interface.
neighbor-id — Drop adjacency with a specific router ID on a specific
•
interface.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example shows the options for the clear ip ospf command.
console#clear ip ospf ?
<cr>
configuration
counters
neighbor
redistribution Flush and reoriginate external LSAs
compatible rfc1583
Use the compatible rfc1583 command in Router OSPF Configuration mode
to enable OSPF 1583 compatibility. Use the no form of the command to
disable it.
vlan-id — Drop adjacency with all neighbors on a specific
Press enter to execute the command.
Restore OSPF configuration to defaults
Clear OSPF counters
Bounce all OSPF neighbors
OSPF Commands
1089