The following example configures an access-list called
console(config)# management access-class mlist
Use the management access-list command in Global Configuration mode to
define an access list for management, and enter the access-list for
configuration. Once in the access-list configuration mode, the denied or
permitted access conditions are configured with the deny and permit
commands. To remove an access list, use the no form of this command.
no management access-list
name — The access list name. (Range: 1–32 printable characters)
This command has no default configuration.
Global Configuration mode
This command enters the access-list configuration mode, where the denied or
permitted access conditions with the deny and permit commands must be
If no match criteria are defined the default is deny.
If reentering to an access-list context, the new rules are entered at the end of
Use the management access-class command to select the active access-list.
The active management list cannot be updated or removed.
Management ACL Commands