Show Ipv6 Traffic - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Example
The following example displays a summary of the routing table.
console#show ipv6 route summary
IPv6 Routing Table Summary - 0 entries
Connected Routes............................. 0
Static Routes................................ 0
OSPF Routes.................................. 0
Intra Area Routes............................ 0
Inter Area Routes............................ 0
External Type-1 Routes....................... 0
External Type-2 Routes....................... 0
Total routes................................. 0
Number of Prefixes:

show ipv6 traffic

Use the show ipv6 traffic command in User EXEC mode to show traffic and
statistics for IPv6 and ICMPv6.
Syntax
show ipv6 traffic [vlan
vlan-id — Valid VLAN ID, shows information about traffic on a specific
interface or, without the optional parameter, shows information about
traffic on all interfaces.
tunnel — Tunnel identifier. (Range: 0-7)
loopback — Loopback identifier. (Range: 0-7)
Default Configuration
This command has no default configuration.
vlan-id
| tunnel
tunnel-id
| loopback
IPv6 Routing Commands
loopback-id
]
1007

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents