Passwords Min-Length; Passwords Strength-Check - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

passwords min-length

Use the passwords min-length command in Global Configuration mode to
enforce a minimum length password length for local users. The value also
applies to the enable password. The valid range is 8–64. The default is 8. Use
the no version of this command to set the minimum password length to 8.
Syntax
length
passwords min-length
no passwords min-length
length — The minimum length of the password (Range: 8–64 characters)
Default Configuration
By default, the minimum password length is 8 characters.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures user bob with password xxxyymmmm and
user level 15.
(config)# username bob password xxxyyymmm level 15

passwords strength-check

Use the passwords strength-check command in Global Configuration mode
to enable the Password Strength feature. The command is used to enable the
checking of password strength during user configuration. Use the no form of
the command to disable the Password Strength feature.
Syntax
passwords strength-check
1395
Password Management Commands

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents