Dell PowerEdge M420 Reference Manual page 1011

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Syntax
traceroute ipv6 {
ipv6-address — Destination IPv6 address.
hostname — Hostname to ping (contact). (Range: 1–158 characters). The
command allows spaces in the host name when specified in double quotes.
For example,
port — UDP port used as the destination of packets sent as part of the
traceroute. This port should be an unused port on the destination system.
(Range: 0–65535)
Default Configuration
33434 is the default port value.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example discovers the packet routes on a hop-by-hop basis.
console#traceroute ipv6 2020:1::1
Tracing route over a maximum of 20 hops
1 * N * N * N
ip-address
hostname
|
console(config)#traceroute "host name"
port
} [
]
IPv6 Routing Commands
1011

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents